It is no longer necessary to install the fireplace only on a masonry or concrete wall with a chimney as technology advances. Now, free-standing fireplaces are wherever you can put them in your home. There are many sizes, colours and patterns to choose from.
The location of the fireplaces and their portability is important when you have to choose the best fireplace for your home. You can make a separate niche to install the fireplace. You can also have two separate shelves, one for storing the logs of the fireplace and the other for installing and setting up the right fireplace.
There are countless options that will surprise you with their installation methods and appearance. These heaters can have convection temperatures, traditional, wood, gas, stone or metal.
Keep your fireplace safe
Most people think that their chimneys and fireplaces are eternal parts of their home that require little or no maintenance. While stonemasonry work is usually as close to maintenance-free as you can get, chimneys and fireplaces are part of the heating system of your home, which should effectively drain the fumes from the fireplace, water heater and stove.
When installing free-standing fireplaces, care must be taken to ensure that there are no flammable substances in the vicinity, and that gases and smoke escape to the outside.
How fulfilled are you in your life?
If you want to stop fighting and live life to the full, Lifehack has a solution for you.
Take a full life cycle assessment
The 2 most serious problems that result from poorly maintained fireplaces
1. carbon monoxide toxin
It is a very dangerous substance that comes out of the fireplaces and as soon as it gets into the body, it goes into the whole body and also into the brain. Children in particular react to brain injuries after a fairly low level of contact.
2 Chimney fires
When a fire burns, it produces smoke. When the smoke enters the chimney, it comes into contact with the moderately cooler interior of the chimney, where the amount of smoke compresses. The resulting smoke is called creosote, and when enough creosote is produced, a professional is needed to clean the free-standing fireplace.
How do I choose a free-standing fireplace?
There are several types of fireplaces on the market. Now it is up to you what you choose. Some of the most frequently chosen fireplaces are listed below:
1) Cabinet style
This universal device can be used as a warehouse, entertainment centre and fireplace.
2. insert .
Replace the built-in, suction-heating fire heater with an additional heat source using an insert that falls into the firebox. A fan is attached to the insert, which transfers heat to the house.
Get the target you always wanted.
Achieve my goal!
3. wall bracket
Its thin construction allows you to hang this type of fireplace on any wall, like any work of art.
4 Tablet and portable
In dense rooms or in conditions where you want to move the glow of sparkling flames from place to place, think of a mobile fireplace.
5. the ventilation hole less
This type of free-standing fireplace does not need a chimney or a pipe outside, so you can place it almost anywhere. As an excellent source of additional heat, an open fireplace also generates moisture, so check the manufacturer's suggestions for the size of the room to avoid excessive saturation.
Several free-standing fireplaces need a chimney or flue that extends over the top to extract smoke, fumes and carbon monoxide from the house. Unfortunately, these conservative editions also extract warm air. To save energy, you should think of the "Direct vent" edition, which offers two pipes, one to draw air from outside to stimulate the fire, and the other to extract smoke and fumes.